- Will cut both an internal and external radiius with the use of either pins or engraved sight lines.
- Made from 12mm hardwearing CNC machined Compact Grade High Pressure Laminate.
- Will cut a 90 degree angle, which when combined with the straight slot will allow a hob or sink aperture to be routed. Central slot allows cuts up to 820mm long.
- Radius curves at 40mm, 60mm, 80mm, 100mm, 150mm and 250mm, and has external radii of 50mm, 100mm and 200mm
- Jig has a 45 degree end cut , plus 26mm and 35mm cabinet door hinge recess facility.
- Engraved lines to position jig to marked position on the worktop.
- Each of the six radius curves is paired with a set of peg holes that will set the jig to work top edge.
- Pins made from ABS plastic for strength.
- Jig requires:
- A portable plunge router with 12.7mm (1/2 inch) shank capacity and minimum 1300 watts.
- A template guide bush with 30mm outside diameter.
- A TCT router cutter with 12.7mm (1/2 inch) diameter and 50mm (2 inch) cut length.
- Two clamps.
| Manufacturer |
|---|
Be the first to review “TREND Aperature Radius Jig”
Related products
Out of stock
Reviews
There are no reviews yet.