TREND Contractor Lock Jig
€128.94 (Incl VAT)
Contractor jig with interchangeable templates for use with a plunge router to cut the mortise & face-plate recess for popular door locks.
- For most common sash mortises & dead locks, with up to 3 inch deep mortises & a 7/8 inch or 1 inch face-plate.
- Deeper mortises can be achieved with a suitable size of auger bit.
- Fast, clean & accurate results on doors 34mm to 58mm thick, even in hardwood.
- Steel plates & body.
- An auger bit and drill is required to complete deep mortises.
- The jig requires a 1/2- inch plunge router with a 80mm plunge, fitted with a 30mm guide bush with 6mm spigot & 12mm diameter long reach cutter. A 1/4-inch plunge router can be used for the face plate but will not achieve full depth of mortise.
Out of stock
- Door thickness min.
- 34 mm
- Door thickness max.
- 58 mm
- Template outer size
- 234.3 x 59.8 x1.5mm
- Metric (Imperial approx.) (D x OL)
- Template
- 22.2×156 mm (7/8″x 6 1/8″)
- 1
- 22.5×152.5 mm (7/8″x 6″)
- 2
- 25.4×121 mm (1″x 4 3/4″)
- 3
- 25.4×127.5 mm (1″x 5″)
- 4
- 25.4×133.5 mm (1″x 5 1/4″)
- 5
- 25.4×145 mm (1″x 5 3/4″)
- 6
- 25.4×153 mm (1″x 6″)
- 7
- 25.4×156.5 mm (1″x 6″)
- 8
- 25.4×165.5 mm (1″x 6 1/2″)
- 9
- 25.4×177 mm (1″x 7″)
- 10
- 25×57.5 mm (1″x 2 1/4″)
- 11 UPPER
- 26×56.5 mm (1″x 2 1/4″)
- 11 LOWER
- 25.6x162mm (1″x 6 3/8″)
- 12
Mortise Lock Dimensions
- Imperial (Metric) (D x OL)
- Template
- 16×72 mm* (5/8″ x 2 7/8″)
- A
- 16×107 mm* (5/8″ x 4 1/4″)
- B
- 19×78 mm* (3/4″ x 3 1/8″)
- C
- 19×109 mm* (3/4″ x 4 1/4″)
- D
24 mm x 24 mm (2 x circle)
*These are maximum mortise lock case (body) lengths, unless radius ends are squared with a chisel. Actual length of mortise is 7mm longer.
| Manufacturer |
|---|
Be the first to review “TREND Contractor Lock Jig”
Related products
Reviews
There are no reviews yet.